Development of Sensors System for Taking Pressure and Temperature Reading for Gas Wells by Satellites
Muhammad Abu Bakr Al-Saker *
Processing Department, Sirt Oil and Gas Production and Processing Company, Libya.
Ahmed Jummah Eshoom
Utility Department, Ras Lanuf Oil and Gas Processing Company, Libya.
Monaem Elmnifi
Department of Mechanical Engineering, Bright Star University, Libya.
Taibi Abdelhalim
Ziane Achour University of Djelfa, Algeria.
*Author to whom correspondence should be addressed.
Abstract
In the current technological scenario, sensors of all kinds have become the most important and accurate means and techniques used in various industrial and life fields, One of these sensors is the BMP 280 sensor, which is sensitive to changing temperatures and pressures, On any equipment that's fitted to it, Provided that it is connected to the Arduino board, which is the means for its operation and working, And then you're given a reading, a signal, or an alert on a change, And what we have done in this study is to add GPS, but not to determine a location, but to help transmit only a signal that comes out of the sensor to transmit it to the control rooms, This is due to the distance from the gas wells to the purification plants and the removal of impurities, Where the results were very encouraging, satisfactory, low cost, and high quality of transportation.
Keywords: Pressure and temperature sensors, satellites
How to Cite
Downloads
References
Soloman, Sabrie, Sensors Handbook, 2ed , New York : McGraw-Hill; 2016.
Brian W. Evans, Arduino programming, Notebook,1st ed. USA: San Francisco, California; 2014.
Yuan Jin Lei. Sensor for toxic gas detection platinum metals perform an important Role, Na3,china. 2016;146–150.
Sherr, Jeremy. Argon. grat Britain : Saltire books; 2018.
Finite position set-phase locked loop for sensor less control of direct- driven permanent-magnet synchronous generators- By: Abdelrahem, Mohamed; Hackl, Christoph M.; Kennel, Ralph IEEE Transactions on Power Electronics. 2018;33(4):3097-3105. Published: APR.
Time-domain modeling of grounding systems' impulse response incorporating nonlinear and frequency-dependent aspects - By: Kherif, Omar; Chiheb, Sofiane; Teguar, Madjid; et al. IEEE Transactions on Electromagnetic Compatibility. 2018;60(4):907-916. Published: AUG.
Simplified small-signal model for output voltage control of asymmetric cascaded H-bridge multilevel inverter- By: CuriBusarello, Tiago Davi; Mortezaei, Ali; Morales Paredes, HelmoKelis; et al. IEEE Transactions on Power Electronics. 2018;33(4):3509-3519. Published: APR.
Quasi optimum PI controller tuning rules for a grid-connected three phase AC to DC PWM rectifier- By: Taha, Wesam; Beig, Abdul R.; Boiko, Igor International Journal of Electrical Power & Energy Systems. 2018;96:74-85 Published: MAR.
A framework for an intelligent and personalized fire evacuation management system by Jinyue Zhang, Jianing Guo, Haiming Xiong, Xiangchi Liu, Daxin Zhang Sensors. 2019;19(14):3128. (registering DOI)
Miller RK, Hill EV. (Eds.) Nondestructive testing handbook, acoustic emission, 3rd ed.; ASNT: Columbus, OH, USA. 2005;6:446.
ASTM International. ASTM E1106-12 standard method for primary calibration of acoustic emission sensors; ASTM International: West Conshohocken, PA, USA; 2016.
ASTM International. ASTM E976-15, standard guide for determining the reproducibility of acoustic emission sensor response; ASTM International: West Conshohocken, PA, USA; 2015.
Abdelwanis NS, El Feitouri F, Elmnifi M. Implementation of lean six sigma approaches in construction operations. Global Journal of Research In Engineering; 2020.